RTD / PRT Calibration in Green Bay

Step 1: Incoming Inspection and Documentation

Each RTD or PRT submitted for calibration is inspected for physical damage, contamination, and electrical integrity. Insulation resistance is measured to verify that the sensing element is not grounded to the sheath. The sensor's specifications, including nominal resistance value, tolerance class, and requested calibration points, are documented in the calibration management system.

Step 2: Stabilization and Immersion in Temperature Source

The UUT and a reference standard PRT are immersed together in a calibration medium. For comparison calibrations, stirred liquid baths filled with silicone oil, ethanol, or other appropriate fluids are used to achieve thermal uniformity. For fixed-point calibrations, ITS-90 fixed-point cells containing pure substances such as the triple point of water (0.01 °C), the freezing point of tin (231.928 °C), or the freezing point of zinc (419.527 °C) are employed. Adequate immersion depth is maintained to eliminate stem conduction errors.

Step 3: Resistance Measurement and Data Acquisition

Precision digital multimeters or resistance bridges with resolution to 0.0001 Ω or better are used to measure the resistance of both the reference standard and the UUT at each calibration temperature point. Multiple readings are recorded at each point after thermal equilibrium is confirmed. Four-wire measurement technique is applied to eliminate lead wire resistance from the measurement.

Step 4: Data Analysis and Uncertainty Calculation

Measured resistance values are converted to temperature using ITS-90 reference functions or Callendar-Van Dusen coefficients. Deviations between the UUT reading and the reference standard are calculated at each calibration point. A measurement uncertainty budget is developed in accordance with the GUM (Guide to the Expression of Uncertainty in Measurement), accounting for reference standard uncertainty, bath uniformity, bridge resolution, and other contributing factors.

Step 5: Certificate Issuance

A calibration certificate is generated documenting the as-found and as-left data, measurement uncertainties at each calibration point, reference standard traceability information, and environmental conditions during calibration. Certificates issued by an ISO/IEC 17025 accredited laboratory carry the accreditation body's mark and are recognized internationally through ILAC mutual recognition arrangements.

RTD and PRT calibration is governed by a framework of international and national standards that define sensor specifications, calibration procedures, and laboratory quality requirements. ISO/IEC 17025:2017 establishes the general requirements for the competence of calibration laboratories, mandating documented quality management systems, validated measurement procedures, and participation in proficiency testing programs. Accreditation under ISO/IEC 17025 by bodies such as A2LA (American Association for Laboratory Accreditation) provides independent verification that a laboratory operates with technical competence and produces reliable calibration results.

IEC 60751:2022 defines the resistance-temperature relationship for platinum resistance thermometers, specifying a temperature coefficient of 0.003851 Ω/Ω/°C and tolerance classes including Class AA, A, B, and C. ASTM E1137/E1137M establishes the physical, performance, and testing requirements for metal-sheathed industrial PRTs, covering temperature ranges from −200 °C to 650 °C. The International Temperature Scale of 1990 (ITS-90) serves as the defining temperature scale, maintained by the Bureau International des Poids et Mesures (BIPM), against which all calibration measurements are referenced. NIST traceability ensures that calibration results link through an unbroken chain of documented comparisons to national measurement standards maintained at the National Institute of Standards and Technology.

Calibrated RTDs and PRTs serve critical temperature measurement roles across a broad range of industries where accuracy, repeatability, and regulatory compliance are non-negotiable. In the pharmaceutical and life sciences sector, calibrated RTDs are required for monitoring sterilization processes, Clean-in-Place (CIP) systems, lyophilization chambers, and controlled storage environments under FDA 21 CFR Part 211 and EU GMP Annex 15 requirements. Calibration intervals of 3 to 6 months are standard for critical pharmaceutical process instrumentation.

The food and beverage processing industry relies on calibrated RTDs to verify temperatures in ovens, pasteurizers, refrigeration units, and HACCP-mandated critical control points. In oil and gas operations, calibrated PRTs monitor refinery process temperatures, pipeline flow measurement systems, and custody transfer metering stations where measurement accuracy directly affects fiscal accounting. Aerospace and defense applications employ calibrated RTDs in engine monitoring systems, environmental test chambers, and avionics thermal management systems where sensor drift is unacceptable. Power generation facilities use calibrated PRTs to monitor turbine bearing temperatures, feedwater systems, and heat exchangers. Semiconductor and electronics manufacturing depends on precisely calibrated RTDs for thermal profiling of reflow ovens, diffusion furnaces, and cleanroom environmental controls.